Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 96169 | ELECTRIC BOAT CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMCZ | FIRST END KEYWAY WIDTH | 0.1890 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 16.280 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| MATT | MATERIAL | NICKEL ALLOY 400 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CLASS A FED SPEC SINGLE MATERIAL RESPONSE |
| AMDG | FIRST END KEYWAY DEPTH | 0.112 INCHES NOMINAL |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.716 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | INDENTED FLAT KEYWAY |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 1.104 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.7480 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.185 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 5 |
| AAHN | END SIMILARITY | IDENTICAL |